Intranet & Private Site – All-In-One Intranet vs Secure Passkeys

Plenty of companies run their intranet on WordPress. The problem is that WordPress was built for public-facing sites. Making it work as a private intranet typically requires installing multiple plugins, configuring each one separately, and hoping they all play nicely together. All-In-One Intranet turns your WordPress site into a fully private intranet from a single plugin. Enable privacy with one checkbox, set up auto-logout to protect sensitive information, configure where users land after login, and manage multisite access controls, all from one settings page. Corporate intranet, private knowledge base, restricted client portal, internal comms hub: the privacy and access control are the same job in each case, and this plugin does that part. What is an Intranet? An intranet is a private website or network used internally by an organization. Unlike a public website, an intranet is only accessible to authorized users: typically employees, contractors, or specific team members. Common uses for a WordPress intranet include: Internal company communications and announcements Employee handbooks, policies, and procedures Knowledge bases and documentation wikis Project collaboration and team coordination HR portals for onboarding and training materials Client portals with restricted access to project files WordPress already has the editing interface and the user roles for all of these. What it does not have is the access control layer, which is what All-In-One Intranet adds. Features All-In-One Intranet has five features, covering what most intranets need: One-Click Private Site Enable the “Force site to be entirely private” checkbox, and your entire WordPress site becomes restricted to logged-in users only. Anyone who is not logged in gets redirected to the WordPress login page automatically. This single setting handles multiple layers of privacy at once: Page and post access – all frontend content requires authentication REST API protection – unauthenticated REST API requests are blocked with a 401 error, so data cannot leak through the API XML-RPC blocking – XML-RPC is disabled entirely when privacy is active Search engine blocking – the robots.txt file is automatically updated to disallow all crawling, so your private content stays out of search indexes Pingback suppression – outgoing pingbacks and trackbacks are disabled so your private site does not announce itself to external services Feed protection – RSS, Atom, and comment feeds require authentication, so protected posts and comments cannot be read through /feed/ or crafted feed URLs Comment and trackback blocking – unauthenticated visitors cannot post comments or trackbacks to protected content through wp-comments-post.php or wp-trackback.php Admin endpoint gating – the admin-ajax.php and admin-post.php handlers require a valid login, so public “nopriv” actions registered by your theme or other plugins do not run for logged-out visitors. A short allowlist keeps the handlers people need before login working: two-factor and passkey plugins, and connected site-management platforms Entry-point coverage – WordPress files that load the site outside the normal page render, such as wp-links-opml.php (the blogroll and OPML export) and wp-activate.php, are sealed so they cannot leak post content, feeds, your site title, or the WordPress version Slug enumeration prevention – WordPress’s canonical redirect does not reveal the slugs of private posts to unauthenticated visitors on pretty permalinks Role and membership enforcement – the REST API and comment gates apply the same role and sub-site membership checks as the rest of the site, so a logged-in user with no role, or who is not a member of the current sub-site, is blocked there too The plugin also watches your registration settings: if “Anyone can register” is enabled, or open registration is allowed on a multisite network, a warning appears on the settings page so you can fix it. Auto-Logout for Inactive Users Shared workstations and forgotten browser tabs are a security risk for intranets. The auto-logout feature lets you set a maximum idle time (in minutes, hours, or days) after which users are automatically logged out. The plugin tracks when each browser session was last active. On every page load, it checks whether the configured idle time has been exceeded. If a session has been idle for too long, the user is logged out immediately and redirected back to the page they were viewing, which triggers the login wall if the site is private. Each session keeps its own timer, so staying active at your desk does not keep a forgotten login on a shared machine alive. This protects sensitive company information without requiring users to remember to log out manually. Set it to 30 minutes for high-security environments, a few hours for typical office use, or leave it blank to disable the feature entirely. Auto-logout counts browser sessions only. A request that authenticates without a login cookie (a site management dashboard using its own API, or a script using an application password) has no session to expire, so it is left alone. Custom Login Redirect By default, WordPress sends users to the dashboard after they log in. For an intranet, this is not useful: your team is logging in to read content, not to manage the site. The login redirect feature lets you set any URL on your site as the post-login landing page. Point it to your company homepage, a news feed, or a team dashboard so users see relevant content right away. This redirect only applies when users log in directly through the standard WordPress login page. A user who was redirected to the login page from a specific URL is sent back to that URL instead. Multisite Sub-site Privacy If you run a WordPress multisite network, you can require logged-in users to be members of a specific sub-site before they can view it. This is useful for organizations with multiple departments, teams, or client areas, each with their own sub-site that should only be visible to relevant people. When a user who is logged in but not a member of the current sub-site tries to access it, they see a message listing all the sub-sites they do have access to, with clickable links to navigate there. Access to the Network Admin area is never restricted by this setting. This option works in combination with the main privacy setting: enable private site first, then add sub-site membership requirements on top of it. Multisite Default Role Assignment Managing user access across multiple sub-sites in a WordPress network can be tedious: every new user and every new sub-site means assigning roles by hand. The default role assignment feature automates this. Choose a role (Subscriber, Editor, Administrator, or any custom role), and the plugin handles the rest: When a new user is created, they are automatically added to every active sub-site in the network with the selected role When a new sub-site is created, all existing users are automatically added to it with the selected role How to Make Your WordPress Site Private It takes about a minute to make your WordPress site private with All-In-One Intranet: Install and activate the plugin from the WordPress plugin directory Go to Settings > All-In-One Intranet in your WordPress admin (or Network Admin > Settings > All-In-One Intranet for multisite) Check the box labeled “Force site to be entirely private” Click Save Changes That is all it takes. Your site is now private. Any visitor who is not logged in will be redirected to the WordPress login page. The REST API, XML-RPC, and search engine indexing are all locked down automatically. If you see a warning about registration settings, follow its link to disable open registration. How to Set Up Auto-Logout for Inactive Users The auto-logout feature protects your intranet from unattended browser sessions: Go to Settings > All-In-One Intranet Find the Auto Logout section Enter a number in the time field (e.g., 30) Select the time unit from the dropdown: Minutes, Hours, or Days Click Save Changes Users who are inactive for longer than the configured period will be logged out on their next page interaction. Their activity timer resets on every page load, so active users are never interrupted. The timer belongs to the browser session, so being active in one browser does not keep the same account signed in on another machine. To disable auto-logout, clear the time field and save. How to Configure Login Redirect To send users to a specific page after they log in: Go to Settings > All-In-One Intranet Find the Login Redirect section Enter the full URL of your desired landing page (e.g., https://example.com/welcome) Click Save Changes Users who log in via /wp-login.php will now land on that page instead of the WordPress dashboard. Users who were redirected to the login page from a specific URL will still return to that URL after logging in. How to Set Up a WordPress Multisite Intranet For organizations running a WordPress multisite network: Go to Network Admin > Settings > All-In-One Intranet Enable “Force site to be entirely private” to restrict the entire network to logged-in users Optionally enable “Require logged-in users to be members of a sub-site to view it” for per-site access control Under Sub-site Membership, select a default role to automatically assign users to sub-sites Click Save Changes The privacy and membership settings apply network-wide. The default role assignment runs automatically when new users or new sub-sites are created. Existing sub-sites and users are not affected retroactively when you change the role setting. Security Features All-In-One Intranet takes a layered approach to access control: Authentication enforcement – uses WordPress’s built-in auth_redirect() function for reliable login redirection REST API lockdown – blocks unauthenticated API requests to endpoints like /wp-json/wp/v2/posts XML-RPC disabling – completely disables XML-RPC when privacy is active No-role user handling – on single-site installations, users who are logged in but have no assigned role are logged out and shown an error message, so an account deactivated by removing its role cannot get in Registration monitoring – warns you if WordPress is configured to allow open registration, which would undermine your private site setup Nonce verification and capability checks – settings forms use WordPress nonce validation, and settings pages require manage_options (single site) or manage_network_options (multisite) Media uploads (images, PDFs, etc.) remain accessible to anyone who knows their direct URL. This is a limitation of how WordPress stores media files and is common to most privacy plugins. If you need to protect individual file downloads, consider a dedicated file protection plugin alongside All-In-One Intranet. For Developers All-In-One Intranet provides the aioi_allow_public_access filter for developers who need to make specific pages or endpoints accessible without authentication. This filter runs during both the template redirect check and the REST API dispatch check. Return true to allow public access for the current request: add_filter( 'aioi_allow_public_access', function( $allow ) { // Allow public access to a specific page if ( is_page( 'public-landing' ) ) { return true; } return $allow; } ); This is useful for exposing specific landing pages, webhook endpoints, or custom API routes while keeping the rest of the site private. Two more filters cover login-screen plugins, which have to finish their authentication exchange while the visitor is still logged out. aioi_public_actions lists the admin-ajax.php / admin-post.php actions that may still run while the site is private, and aioi_public_rest_routes does the same for plugins that verify a second factor over the REST API, matching a route exactly or as a path segment prefix. Two-factor and passkey plugins are already covered out of the box, and every bundled entry applies only while the plugin it belongs to is active, so a private site never leaves an endpoint open for a plugin it does not run. Only add authentication endpoints to either list. Anything on them can be called by logged-out visitors, so it must not return site content, and it must do its own credential or token check. Site-management platforms are the deliberate exception, because returning site content is their whole purpose. See the next section. Site Management Dashboard Compatibility Many agencies and IT teams look after every site they run from a central dashboard that handles updates and backups. Making a site private should not cut it off from that dashboard, so these connector plugins are supported out of the box, with nothing to configure: ManageWP Worker – also the connector used by GoDaddy Pro MainWP Child InfiniteWP Client WP Umbrella WP Remote Each of these talks to its dashboard over its own signed protocol rather than a browser login. Site syncing, plugin and theme updates, backups, and the dashboard’s one-click login into wp-admin all keep working with “Force site to be entirely private” enabled. ManageWP, MainWP and InfiniteWP answer their dashboards from their own hooks, before the privacy gate runs, so nothing needs to be opened for them. The other two each need one narrow exemption, granted only to a request the platform itself has already vouched for. WP Umbrella works entirely through the WordPress REST API, which a private site otherwise closes, so its own namespace opens only for a request presenting WP Umbrella’s credentials, and the admin-ajax.php calls it makes back to itself open only for a request carrying the nonce those handlers verify. WP Remote routes part of its traffic through admin-ajax.php, and that one action opens only once WP Remote has checked the caller’s signature and registered its handler. An anonymous request to either still meets the login wall, a credentialed one still has to satisfy the platform’s own checks, and every other route, action and page stays private. Auto-logout handles those background calls too: a dashboard request is never logged out in the middle of an API call, and it does not count as the connected administrator’s own activity, so frequent polling cannot hold a real person’s session open past the idle limit you set. A private site does still hide anything a service fetches anonymously from its own servers: uptime monitoring, broken-link checking, and SEO or page-speed scans. Those requests carry no login, so they get the login redirect and the dashboard usually reports the site as down or its links as broken. That applies to every external service, not only these five.

Secure Passkeys is a powerful WordPress plugin that enables seamless passwordless authentication using WebAuthn technology. By eliminating the need for traditional passwords, it enhances security and improves the user login experience. With support for biometric authentication, security keys, and device-bound credentials, Secure Passkey provides a robust and user-friendly solution for modern authentication. Unlike traditional password-based authentication, Secure Passkey leverages cryptographic key pairs to ensure secure logins. The private key remains securely stored on the user’s device, while the public key is registered with the WordPress site. This method protects against phishing attacks and password breaches, ensuring that only authorized users can gain access. Secure Passkeys integrates effortlessly into WordPress, allowing users to register and manage their passkeys from their profile settings. Once registered, users can log in using their fingerprint, face recognition, or a hardware security key without the need to remember or enter a password. Features Passwordless Login: Secure authentication via WebAuthn with biometric devices, security keys, Touch ID, Face ID, and more. Enhanced User Experience: Password-free login for a smoother user journey. Integration Support: WordPress default login form WooCommerce login page MemberPress login form Easy Digital Downloads login form Ultimate Member login form Admin Management: Administrators can delete, activate, or deactivate users directly from plugin settings or user profiles. Passkeys Reminder Notice: New option to enable or disable the passkeys reminder notice in the WordPress admin area for users who have not yet enabled passkeys. Activity Logging: Monitor activity logs and track last login/registration of passkeys. Multiple Passkeys: Supports multiple passkey registrations per user, with the option to set a registration limit or allow unlimited registrations. Role Restrictions: Restrict and exclude specific user roles from using passkey authentication. Passkey Autofill: Passkeys automatically appear as a suggestion when clicking the username field — no button click required. Rate Limiting: Configurable rate limiting on login attempts to protect against automated attacks. Long-lived Session: Control whether passkey logins set a persistent session cookie or end when the browser is closed. Customizable Settings: Adjust timeout settings for passkey registration and login. User Verification: Enforce user verification for enhanced security. Frontend Customization: Easily customize frontend themes or add your own with basic frontend skills. Theme Support: Supports pre-built themes like YOOtheme (UIkit) for frontend shortcodes. Shortcodes: Embed passkey login and registration forms on custom frontend pages. Passkey Display: Show passkey details in admin user lists and profiles. Multisite: Supports WordPress Multisite and single-site installations. Database Optimization: Option to allow or disallow automatic deletion of old challenge records and activity logs (configurable schedule). Requirements WordPress 6.0 or newer. PHP version 7.4 or newer. License Secure Passkeys is licensed under the GNU General Public License v2 or later.